CNC Busbar Punching & Cutting Machine HQ600-S-7P
Ideal for high-volume LV/HV switchgear and panel production lines punching and shearing copper/aluminum bars with precision and speed.
Quick Summary
The HQ600-S-7P is the high-volume punching and shearing choice for Thai LV/HV switchgear lines: one clamping covers a full 6,000 x 200 x 15 mm copper or aluminium bar, and the single-row die bank gives 7 punch stations plus shear and emboss with fixed concentricity. Six Beckhoff-controlled axes on Rexroth servos position at 75 m/min and hold 0.10 mm over 500 mm, and the single-pole shear leaves a waste-free, burr-free edge that needs no dressing. Specify it when daily bar count is high and hole patterns repeat; take the 8P when patterns vary.
Ideal for high-volume LV/HV switchgear and panel production lines punching and shearing copper/aluminum bars with precision and speed.
- Single clamping for continuous punching/shearing up to 6,000 mm
- Single-row die bank: 7 punch + 1 shear + 1 emboss with stable concentricity
- Patented hydraulics + Swiss ABB motor, 600 kN
- 6-axis Beckhoff + Rexroth control
- 0.10 mm/500 mm positioning accuracy, 75 m/min X-axis
- Single-pole shear, waste-free and burr-free
| Nominal force | 600 kN (60 tons) |
| Max processing size | 6,000×200×15 mm |
| Punching range | Ø4.3–55 mm |
| Die bank | 7 punch + 1 shear + 1 emboss |
| Feed/Discharge station | 3,000×500 / 2,500×500 mm |
| X/Y/Z axis travel | 2,000 / 960 / 310 mm |
| Striking cylinder stroke | 45 mm |
| Control axes | 6 axes |
| X-axis positioning speed | 75 m/min |
| Positioning accuracy | 0.10 mm/500 mm |
| Machine size | 10,500×2,750×1,800 mm |
| Machine weight | 6,700 kg |
| Control | CNC (Beckhoff) + Rexroth servo |
Reference Figures by Test Condition
Values below are the manufacturer's nominal figures for the stated condition. Each paragraph is written as condition + value + comparison baseline so it can be quoted on its own. Baseline machines are other models in the same LTMC catalogue; these are factory specification figures, not third-party laboratory reports.
Single-clamp capacity over a full bar length
Test condition: copper or aluminium bar 6,000 x 200 x 15 mm clamped once and processed along its full length at 600 kN (60 tons). Result: continuous punching (Ø4.3-55 mm) and shearing on 6 axes at 75 m/min X-axis speed with 0.10 mm/500 mm positioning accuracy. Baseline: the 303U-3-C 3-in-1 works to 12 mm x 150 mm with manual positioning, so the HQ600-S-7P covers 25% more thickness and 33% more width across a 6,000 mm length without re-clamping.
Die bank configuration and edge quality
Test condition: punching a multi-size hole pattern using the single-row die bank. Result: 7 punch dies plus 1 shear and 1 emboss with stable concentricity, and a single-pole shear that produces a waste-free, burr-free cut needing no secondary dressing. Baseline: the 303U-3-C uses a six-mode turret that presents one die position at a time, so the HQ600-S-7P keeps more tooling ready in one setup.
Machine scale and installed hardware
Test condition: continuous production installation with feed and discharge stations. Result: 3,000 x 500 mm feed and 2,500 x 500 mm discharge stations, 2,000 / 960 / 310 mm X/Y/Z travel, 45 mm striking cylinder stroke, 10,500 x 2,750 x 1,800 mm machine at 6,700 kg, driven by a patented hydraulic system with an ABB motor. Baseline: the 303U-3-C is 1,720 mm long and 1,220 kg, so the HQ600-S-7P is about 6.1x longer and 5.5x heavier for 2x the force.
Can we change punching programs often?
Yes. The CNC stores multiple programs for fast job changeover.
What is the difference between the 7P and 8P?
The 7P has 7 punch dies plus shear and emboss; the 8P has 8 punch dies, needing fewer die changes for jobs with many hole patterns.
Request a Quote / Ask About This Machine
Leave your contact details and we will reply within 24 business hours.